ipng/lab
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Move to vppcfg based configs - generate the initial config in vpp.service. Needs 20260406-2

Browse Source
This commit is contained in:
Pim van Pelt
2026-04-07 17:43:01 +00:00
parent 5838702459
commit 5edda90b62
224 changed files with 977 additions and 1167 deletions
Download Patch File Download Diff File Expand all files Collapse all files

1
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/defaults.vpp
View File

@@ -3,3 +3,4 @@ lcp default netns dataplane
lcp lcp-sync on
lcp lcp-auto-subint off
mpls table add 0

10
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/flowprobe.vpp
View File

@@ -1,10 +0,0 @@
comment { Generate full IPFIX stats, send them to lab.ipng.ch }
set ipfix exporter collector 194.1.163.86 src 192.168.11.0 port 4739 path-mtu 1450 template-interval 30
flowprobe params record l2 l3 l4 active 10 passive 60
flowprobe feature add-del GigabitEthernet10/0/0 l2 both
flowprobe feature add-del GigabitEthernet10/0/1 l2 both
flowprobe feature add-del GigabitEthernet10/0/2 l2 both
flowprobe feature add-del GigabitEthernet10/0/3 l2 both

24
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/interface.vpp
View File

@@ -1,24 +0,0 @@
comment { Gi10/0/0 is connected to lab.ipng.ch:lab1 }
set interface mtu 9000 GigabitEthernet10/0/0
set interface mtu packet 9000 GigabitEthernet10/0/0
set interface ip address GigabitEthernet10/0/0 2001:678:d78:211::0:fffe/112
set interface ip address GigabitEthernet10/0/0 192.168.11.5/31
set interface state GigabitEthernet10/0/0 up
comment { Gi10/0/1 is connected to vpp1-1:Gi10/0/0 }
set interface mtu 9000 GigabitEthernet10/0/1
set interface mtu packet 9000 GigabitEthernet10/0/1
set interface ip address GigabitEthernet10/0/1 2001:678:d78:211::1:10/112
set interface ip address GigabitEthernet10/0/1 192.168.11.6/31
set interface state GigabitEthernet10/0/1 up
comment { Gi10/0/2 is free to use }
set interface mtu 9000 GigabitEthernet10/0/2
set interface mtu packet 9000 GigabitEthernet10/0/2
set interface state GigabitEthernet10/0/2 down
comment { Gi10/0/3 is free to use }
set interface mtu 9000 GigabitEthernet10/0/3
set interface mtu packet 9000 GigabitEthernet10/0/3
set interface state GigabitEthernet10/0/3 down

7
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/lcp.vpp
View File

@@ -1,7 +0,0 @@
comment { Create one LinuxCP Interface Pair for each phy }
lcp create loop0 host-if loop0
lcp create GigabitEthernet10/0/0 host-if e0
lcp create GigabitEthernet10/0/1 host-if e1
lcp create GigabitEthernet10/0/2 host-if e2
lcp create GigabitEthernet10/0/3 host-if e3

5
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/loopback.vpp
View File

@@ -1,5 +0,0 @@
comment { Create a loopback interface }
create loopback interface instance 0
set interface state loop0 up
set interface ip address loop0 192.168.11.0/32
set interface ip address loop0 2001:678:d78:210::/128

0
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/manual.vpp → build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/manual-post.vpp
View File

2
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/manual-pre.vpp Normal file
View File

@@ -0,0 +1,2 @@
comment { Put any config for vpp1-0 you'd like here. }
comment { It will persist across restarts of VPP and reboots of the VM. }

2
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/mpls.vpp
View File

@@ -1,2 +0,0 @@
mpls table add 0
set interface mpls GigabitEthernet10/0/1 enable

8
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/sflow.vpp
View File

@@ -1,8 +0,0 @@
sflow header-bytes 128
sflow sampling-rate 100
sflow polling-interval 10
sflow enable GigabitEthernet10/0/0
sflow enable GigabitEthernet10/0/1
sflow enable GigabitEthernet10/0/2
sflow enable GigabitEthernet10/0/3

1
build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/vppcfg.vpp Normal file
View File

@@ -0,0 +1 @@
comment { This file is autogenerated from /etc/vpp/vppcfg.yaml at boot time }