add sflow config

build/bird/hvn0.lab.ipng.ch/vpp0-0/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn0.lab.ipng.ch/vpp0-0/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn0.lab.ipng.ch/vpp0-0/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:200::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:200::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn0.lab.ipng.ch/vpp0-0/etc/bird/core/static.conf

@@ -1,15 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.10.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
-  route 0.0.0.0/0 via 192.168.10.4;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:200::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
-  route ::/0 via 2001:678:d78:201::ffff;
 }

build/bird/hvn0.lab.ipng.ch/vpp0-0/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn0.lab.ipng.ch/vpp0-0/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn0.lab.ipng.ch/vpp0-1/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn0.lab.ipng.ch/vpp0-1/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn0.lab.ipng.ch/vpp0-1/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:200::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:200::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn0.lab.ipng.ch/vpp0-1/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.10.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:200::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn0.lab.ipng.ch/vpp0-1/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn0.lab.ipng.ch/vpp0-1/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn0.lab.ipng.ch/vpp0-2/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn0.lab.ipng.ch/vpp0-2/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn0.lab.ipng.ch/vpp0-2/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:200::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:200::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn0.lab.ipng.ch/vpp0-2/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.10.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:200::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn0.lab.ipng.ch/vpp0-2/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn0.lab.ipng.ch/vpp0-2/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn0.lab.ipng.ch/vpp0-3/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn0.lab.ipng.ch/vpp0-3/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn0.lab.ipng.ch/vpp0-3/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.10.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:200::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:200::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn0.lab.ipng.ch/vpp0-3/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.10.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:200::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn0.lab.ipng.ch/vpp0-3/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn0.lab.ipng.ch/vpp0-3/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:210::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:210::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/bird/core/static.conf

@@ -1,15 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.11.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
-  route 0.0.0.0/0 via 192.168.11.4;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:210::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
-  route ::/0 via 2001:678:d78:211::ffff;
 }

build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn1.lab.ipng.ch/vpp1-0/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn1.lab.ipng.ch/vpp1-1/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn1.lab.ipng.ch/vpp1-1/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn1.lab.ipng.ch/vpp1-1/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:210::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:210::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn1.lab.ipng.ch/vpp1-1/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.11.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:210::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn1.lab.ipng.ch/vpp1-1/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn1.lab.ipng.ch/vpp1-1/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn1.lab.ipng.ch/vpp1-2/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn1.lab.ipng.ch/vpp1-2/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn1.lab.ipng.ch/vpp1-2/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:210::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:210::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn1.lab.ipng.ch/vpp1-2/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.11.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:210::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn1.lab.ipng.ch/vpp1-2/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn1.lab.ipng.ch/vpp1-2/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn1.lab.ipng.ch/vpp1-3/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn1.lab.ipng.ch/vpp1-3/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn1.lab.ipng.ch/vpp1-3/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.11.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:210::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:210::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn1.lab.ipng.ch/vpp1-3/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.11.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:210::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn1.lab.ipng.ch/vpp1-3/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn1.lab.ipng.ch/vpp1-3/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn2.lab.ipng.ch/vpp2-0/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn2.lab.ipng.ch/vpp2-0/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn2.lab.ipng.ch/vpp2-0/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:220::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:220::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn2.lab.ipng.ch/vpp2-0/etc/bird/core/static.conf

@@ -1,15 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.12.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
-  route 0.0.0.0/0 via 192.168.12.4;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:220::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
-  route ::/0 via 2001:678:d78:221::ffff;
 }

build/bird/hvn2.lab.ipng.ch/vpp2-0/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn2.lab.ipng.ch/vpp2-0/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn2.lab.ipng.ch/vpp2-1/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn2.lab.ipng.ch/vpp2-1/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn2.lab.ipng.ch/vpp2-1/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:220::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:220::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn2.lab.ipng.ch/vpp2-1/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.12.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:220::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn2.lab.ipng.ch/vpp2-1/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn2.lab.ipng.ch/vpp2-1/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn2.lab.ipng.ch/vpp2-2/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn2.lab.ipng.ch/vpp2-2/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn2.lab.ipng.ch/vpp2-2/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:220::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:220::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn2.lab.ipng.ch/vpp2-2/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.12.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:220::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn2.lab.ipng.ch/vpp2-2/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn2.lab.ipng.ch/vpp2-2/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn2.lab.ipng.ch/vpp2-3/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn2.lab.ipng.ch/vpp2-3/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn2.lab.ipng.ch/vpp2-3/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.12.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:220::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:220::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn2.lab.ipng.ch/vpp2-3/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.12.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:220::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn2.lab.ipng.ch/vpp2-3/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn2.lab.ipng.ch/vpp2-3/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn3.lab.ipng.ch/vpp3-0/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn3.lab.ipng.ch/vpp3-0/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn3.lab.ipng.ch/vpp3-0/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:230::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:230::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn3.lab.ipng.ch/vpp3-0/etc/bird/core/static.conf

@@ -1,15 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.13.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
-  route 0.0.0.0/0 via 192.168.13.4;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:230::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
-  route ::/0 via 2001:678:d78:231::ffff;
 }

build/bird/hvn3.lab.ipng.ch/vpp3-0/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn3.lab.ipng.ch/vpp3-0/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn3.lab.ipng.ch/vpp3-1/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn3.lab.ipng.ch/vpp3-1/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn3.lab.ipng.ch/vpp3-1/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:230::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:230::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn3.lab.ipng.ch/vpp3-1/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.13.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:230::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn3.lab.ipng.ch/vpp3-1/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn3.lab.ipng.ch/vpp3-1/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn3.lab.ipng.ch/vpp3-2/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn3.lab.ipng.ch/vpp3-2/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn3.lab.ipng.ch/vpp3-2/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:230::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:230::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn3.lab.ipng.ch/vpp3-2/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.13.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:230::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn3.lab.ipng.ch/vpp3-2/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn3.lab.ipng.ch/vpp3-2/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/bird/hvn3.lab.ipng.ch/vpp3-3/etc/bird/bird.conf

@@ -17,4 +17,5 @@ protocol kernel kernel6 {
 include "core/static.conf";
 include "core/bfd.conf";
 include "core/ospf.conf";
+# include "core/babel.conf";
 include "manual.conf";

build/bird/hvn3.lab.ipng.ch/vpp3-3/etc/bird/core/babel.conf

@@ -0,0 +1,13 @@
+protocol babel {
+  interface "e0", "e1" {
+    type wired;
+    extended next hop on;
+    rtt cost 1000;
+    rtt min 5ms;
+    rtt max 30ms;
+    authentication mac permissive;
+    password "IPng loves bird";
+  };
+  ipv6 { import all; export all; };
+  ipv4 { import all; export all; };
+}

build/bird/hvn3.lab.ipng.ch/vpp3-3/etc/bird/core/ospf.conf

@@ -1,21 +1,17 @@
 protocol ospf v2 ospf4 {
-  ipv4 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv4 { export where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; import where net ~ [ 192.168.13.0/24+, 0.0.0.0/0 ]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }
 
 protocol ospf v3 ospf6 {
-  ipv6 { export where (source = RTS_DEVICE || source = RTS_STATIC); import all; };
+  ipv6 { export where net ~ [ 2001:678:d78:230::/60+, ::/0 ]; import where net ~ [ 2001:678:d78:230::/60+, ::/0]; };
   area 0 {
     interface "loop0" { stub yes; };
     interface "e0" { type pointopoint; cost 5; bfd off; };
     interface "e1" { type pointopoint; cost 5; bfd off; };
-    interface "e2" { type pointopoint; cost 5; bfd off; };
-    interface "e3" { type pointopoint; cost 5; bfd off; };
   };
 }

build/bird/hvn3.lab.ipng.ch/vpp3-3/etc/bird/core/static.conf

@@ -1,13 +1,11 @@
 protocol static static4 {
   ipv4 { export all; };
-#  route 192.0.2.0/24 via 10.0.0.1;
   route 192.168.13.0/24 unreachable;
-
+#  route 192.0.2.0/24 via 10.0.0.1;
 }
 
 protocol static static6 {
   ipv6 { export all; };
-#  route 2001:db8:cafe::/48 via 2001:db8::1;;
   route 2001:678:d78:230::/60 unreachable;
-
+#  route 2001:db8:cafe::/48 via 2001:db8::1;
 }

build/bird/hvn3.lab.ipng.ch/vpp3-3/etc/vpp/bootstrap.vpp

@@ -4,6 +4,7 @@ exec /etc/vpp/config/loopback.vpp
 exec /etc/vpp/config/interface.vpp
 exec /etc/vpp/config/lcp.vpp
 exec /etc/vpp/config/mpls.vpp
+exec /etc/vpp/config/sflow.vpp
 
 comment { exec /etc/vpp/config/flowprobe.vpp }
 

build/bird/hvn3.lab.ipng.ch/vpp3-3/etc/vpp/config/sflow.vpp

@@ -0,0 +1,8 @@
+sflow header-bytes 128
+sflow sampling-rate 100
+sflow polling-interval 10
+
+sflow enable GigabitEthernet10/0/0
+sflow enable GigabitEthernet10/0/1
+sflow enable GigabitEthernet10/0/2
+sflow enable GigabitEthernet10/0/3

build/freebsd/hvn2.lab.ipng.ch/host2-0/etc/rc.conf

@@ -0,0 +1,7 @@
+hostname="host2-0"
+ifconfig_vtnet0="inet 198.19.5.34/24"
+defaultrouter="198.19.5.1"
+ifconfig_vtnet0_ipv6="inet6 2001:678:d78:50b::22/64"
+ipv6_defaultrouter="2001:678:d78:50b::1"
+
+sshd_enable="YES"

build/freebsd/hvn2.lab.ipng.ch/host2-0/etc/rc.local

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+for s in /root/lab-build/*
+do
+  echo "** Executing $s"
+  /bin/sh $s
+done

build/freebsd/hvn2.lab.ipng.ch/host2-0/etc/resolv.conf

@@ -0,0 +1,4 @@
+domain lab.ipng.ch
+search lab.ipng.ch net.ipng.ch ipng.ch
+nameserver 194.1.163.3
+nameserver 194.1.163.4

build/freebsd/hvn2.lab.ipng.ch/host2-0/etc/ssh/sshd_config

@@ -0,0 +1,121 @@
+#	$OpenBSD: sshd_config,v 1.104 2021/07/02 05:11:21 dtucker Exp $
+
+# This is the sshd server system-wide configuration file.  See
+# sshd_config(5) for more information.
+
+# This sshd was compiled with PATH=/usr/bin:/bin:/usr/sbin:/sbin
+
+# The strategy used for options in the default sshd_config shipped with
+# OpenSSH is to specify options with their default value where
+# possible, but leave them commented.  Uncommented options override the
+# default value.
+
+# Note that some of FreeBSD's defaults differ from OpenBSD's, and
+# FreeBSD has a few additional options.
+
+#Port 22
+#AddressFamily any
+#ListenAddress 0.0.0.0
+#ListenAddress ::
+
+#HostKey /etc/ssh/ssh_host_rsa_key
+#HostKey /etc/ssh/ssh_host_ecdsa_key
+#HostKey /etc/ssh/ssh_host_ed25519_key
+
+# Ciphers and keying
+#RekeyLimit default none
+
+# Logging
+#SyslogFacility AUTH
+#LogLevel INFO
+
+# Authentication:
+
+#LoginGraceTime 2m
+PermitRootLogin yes
+#StrictModes yes
+#MaxAuthTries 6
+#MaxSessions 10
+
+#PubkeyAuthentication yes
+
+# The default is to check both .ssh/authorized_keys and .ssh/authorized_keys2
+# but this is overridden so installations will only check .ssh/authorized_keys
+AuthorizedKeysFile	.ssh/authorized_keys
+
+#AuthorizedPrincipalsFile none
+
+#AuthorizedKeysCommand none
+#AuthorizedKeysCommandUser nobody
+
+# For this to work you will also need host keys in /etc/ssh/ssh_known_hosts
+#HostbasedAuthentication no
+# Change to yes if you don't trust ~/.ssh/known_hosts for
+# HostbasedAuthentication
+#IgnoreUserKnownHosts no
+# Don't read the user's ~/.rhosts and ~/.shosts files
+#IgnoreRhosts yes
+
+# Change to yes to enable built-in password authentication.
+# Note that passwords may also be accepted via KbdInteractiveAuthentication.
+#PasswordAuthentication no
+#PermitEmptyPasswords no
+
+# Change to no to disable PAM authentication
+#KbdInteractiveAuthentication yes
+
+# Kerberos options
+#KerberosAuthentication no
+#KerberosOrLocalPasswd yes
+#KerberosTicketCleanup yes
+#KerberosGetAFSToken no
+
+# GSSAPI options
+#GSSAPIAuthentication no
+#GSSAPICleanupCredentials yes
+
+# Set this to 'no' to disable PAM authentication, account processing,
+# and session processing. If this is enabled, PAM authentication will
+# be allowed through the KbdInteractiveAuthentication and
+# PasswordAuthentication.  Depending on your PAM configuration,
+# PAM authentication via KbdInteractiveAuthentication may bypass
+# the setting of "PermitRootLogin prohibit-password".
+# If you just want the PAM account and session checks to run without
+# PAM authentication, then enable this but set PasswordAuthentication
+# and KbdInteractiveAuthentication to 'no'.
+#UsePAM yes
+
+#AllowAgentForwarding yes
+#AllowTcpForwarding yes
+#GatewayPorts no
+#X11Forwarding no
+#X11DisplayOffset 10
+#X11UseLocalhost yes
+#PermitTTY yes
+#PrintMotd yes
+#PrintLastLog yes
+#TCPKeepAlive yes
+#PermitUserEnvironment no
+#Compression delayed
+#ClientAliveInterval 0
+#ClientAliveCountMax 3
+#UseDNS yes
+#PidFile /var/run/sshd.pid
+#MaxStartups 10:30:100
+#PermitTunnel no
+#ChrootDirectory none
+#UseBlacklist no
+#VersionAddendum FreeBSD-20231004
+
+# no default banner path
+#Banner none
+
+# override default of no subsystems
+Subsystem	sftp	/usr/libexec/sftp-server
+
+# Example of overriding settings on a per-user basis
+#Match User anoncvs
+#	X11Forwarding no
+#	AllowTcpForwarding no
+#	PermitTTY no
+#	ForceCommand cvs server