set logging class linux-cp rate-limit 1000 level warn syslog-level notice

lcp default netns dataplane
lcp lcp-sync on
lcp lcp-auto-subint off

comment { Create a loopback interface }
create loopback interface instance 0
lcp create loop0 host-if loop0
set interface state loop0 up
set interface ip address loop0 192.168.10.3/32
set interface ip address loop0 2001:678:d78:200::3/128

comment { Create one LinuxCP Interface Pair for each phy }
lcp create GigabitEthernet10/0/0 host-if e0
lcp create GigabitEthernet10/0/1 host-if e1
lcp create GigabitEthernet10/0/2 host-if e2
lcp create GigabitEthernet10/0/3 host-if e3

comment { e0 is uplink to AS8298 }
set interface state GigabitEthernet10/0/0 up
set interface mtu packet 1500 GigabitEthernet10/0/0 
set interface ip address GigabitEthernet10/0/0 192.168.10.7/31
set interface ip address GigabitEthernet10/0/0 2001:678:d78:201::00:00/112

comment { e1 is ptp with e0.vpp0-1 }
set interface state GigabitEthernet10/0/1 up
set interface mtu packet 9000 GigabitEthernet10/0/1 
set interface ip address GigabitEthernet10/0/1 192.168.10.8/31
set interface ip address GigabitEthernet10/0/1 2001:678:d78:201::01:00/112

comment { e2 is free to use }
set interface state GigabitEthernet10/0/2 down
set interface mtu packet 9000 GigabitEthernet10/0/2 

comment { e3 is free to use }
set interface state GigabitEthernet10/0/3 down
set interface mtu packet 9000 GigabitEthernet10/0/3