VPP load-balancer dataplane integration: state, sync, and global conf
This commit wires maglevd through to VPP's LB plugin end-to-end, using
locally-generated GoVPP bindings for the newer v2 API messages.
VPP binapi (vendored)
- New package internal/vpp/binapi/ containing lb, lb_types, ip_types, and
interface_types, generated from a local VPP build (~/src/vpp) via a new
'make vpp-binapi' target. GoVPP v0.12.0 upstream lacks the v2 messages we
need (lb_conf_get, lb_add_del_vip_v2, lb_add_del_as_v2, lb_as_v2_dump,
lb_as_set_weight), so we commit the generated output in-tree.
- All generated files go through our loggedChannel wrapper; every VPP API
send/receive is recorded at DEBUG via slog (vpp-api-send / vpp-api-recv /
vpp-api-send-multi / vpp-api-recv-multi) so the full wire-level trail is
auditable. NewAPIChannel is unexported — callers must use c.apiChannel().
Read path: GetLBState{All,VIP}
- GetLBStateAll returns a full snapshot (global conf + every VIP with its
attached application servers).
- GetLBStateVIP looks up a single VIP by (prefix, protocol, port) and
returns (nil, nil) when the VIP doesn't exist in VPP. This is the
efficient path for targeted updates on a busy LB.
- Helpers factored out: getLBConf, dumpAllVIPs, dumpASesForVIP, lookupVIP,
vipFromDetails.
Write path: SyncLBState{All,VIP}
- SyncLBStateAll reconciles every configured frontend with VPP: creates
missing VIPs, removes stale ones (with AS flush), and reconciles AS
membership and weights within VIPs that exist on both sides.
- SyncLBStateVIP targets a single frontend by name. Never removes VIPs.
Returns ErrFrontendNotFound (wrapped with the name) when the frontend
isn't in config, so callers can use errors.Is.
- Shared reconcileVIP helper does the per-VIP AS diff; removeVIP is used
only by the full-sync pass.
- LbAddDelVipV2 requests always set NewFlowsTableLength=1024. The .api
default=1024 annotation is only applied by VAT/CLI parsers, not wire-
level marshalling — sending 0 caused VPP to vec_validate with mask
0xFFFFFFFF and OOM-panic.
- Pool semantics: backends in the primary (first) pool of a frontend get
their configured weight; backends in secondary pools get weight 0. All
backends are installed so higher layers can flip weights on failover
without add/remove churn.
- Every individual change emits a DEBUG slog (vpp-lbsync-vip-add/del,
vpp-lbsync-as-add/del, vpp-lbsync-as-weight). Start/done INFO logs
carry a scope=all|vip label plus aggregate counts.
Global conf push: SetLBConf
- New SetLBConf(cfg) sends lb_conf with ipv4-src, ipv6-src, sticky-buckets,
and flow-timeout. Called automatically on VPP (re)connect and after
every config reload (via doReloadConfig). Results are cached on the
Client so redundant pushes are silently skipped — only actual changes
produce a vpp-lb-conf-set INFO log line.
Periodic drift reconciliation
- vpp.Client.lbSyncLoop runs in a goroutine tied to each VPP connection's
lifetime. Its first tick is immediate (startup and post-reconnect
sync quickly); subsequent ticks fire every vpp.lb.sync-interval from
config (default 30s). Purpose: catch drift if something/someone
modifies VPP state by hand. The loop uses a ConfigSource interface
(satisfied by checker.Checker via its new Config() accessor) to avoid
an import cycle with the checker package.
Config schema additions (maglev.vpp.lb)
- sync-interval: positive Go duration, default 30s.
- ipv4-src-address: REQUIRED. Used as the outer source for GRE4 encap
to application servers. Missing this is a hard semantic error —
maglevd --check exits 2 and the daemon refuses to start. VPP GRE
needs a source address and every VIP we program uses GRE, so there
is no meaningful config without it.
- ipv6-src-address: REQUIRED. Same treatment as ipv4-src-address.
- sticky-buckets-per-core: default 65536, must be a power of 2.
- flow-timeout: default 40s, must be a whole number of seconds in [1s, 120s].
- VPP validation runs at the end of convert() so structural errors in
healthchecks/backends/frontends surface first — operators fix those,
then get the VPP-specific requirements.
gRPC API
- New GetVPPLBState RPC returning VPPLBState: global conf + VIPs with
ASes. Mirrors the read-path but strips fields irrelevant to our
GRE-only deployment (srv_type, dscp, target_port).
- New SyncVPPLBState RPC with optional frontend_name. Unset → full sync
(may remove stale VIPs). Set → single-VIP sync (never removes).
Returns codes.NotFound for unknown frontends, codes.Unavailable when
VPP integration is disabled or disconnected.
maglevc (CLI)
- New 'show vpp lbstate' command displaying the LB plugin state. VPP-only
fields the dataplane irrelevant to GRE are suppressed. Per-AS lines use
a key-value format ("address X weight Y flow-table-buckets Z")
instead of a tabwriter column, which avoids the ANSI-color alignment
issue we hit with mixed label/data rows.
- New 'sync vpp lbstate [<name>]' command. Without a name, triggers a
full reconciliation; with a name, targets one frontend.
- Previous 'show vpp lb' renamed to 'show vpp lbstate' for consistency
with the new sync command.
Test fixtures
- validConfig and all ad-hoc config_test.go fixtures that reach the end
of convert() now include the two required vpp.lb src addresses.
- tests/01-maglevd/maglevd-lab/maglev.yaml gains a vpp.lb section so the
robot integration tests can still load the config.
- cmd/maglevc/tree_test.go gains expected paths for the new commands.
Docs
- config-guide.md: new 'vpp' section in the basic structure, detailed
vpp.lb field reference, noting ipv4/ipv6 src addresses as REQUIRED
(hard error) with no defaults; example config updated.
- user-guide.md: documented 'show vpp info', 'show vpp lbstate',
'sync vpp lbstate [<name>]', new --vpp-api-addr and --vpp-stats-addr
flags, the vpp-lb-conf-set log line, and corrected the pause/resume
description to reflect that pause cancels the probe goroutine.
- debian/maglev.yaml: example config gains a vpp.lb block with src
addresses and commented optional overrides.
This commit is contained in:
@@ -88,10 +88,26 @@ show healthchecks [<name>] Without name: list all health-check names.
|
||||
show vpp info Show VPP version, build date, PID, uptime, and when
|
||||
maglevd connected. Returns an error if VPP is not
|
||||
connected.
|
||||
show vpp lbstate Show the VPP load-balancer plugin state: global
|
||||
configuration, configured VIPs, and their attached
|
||||
application servers (address, weight, bucket count).
|
||||
Returns an error if VPP is not connected.
|
||||
|
||||
set backend <name> pause Suspend health checking for a backend, freezing its state.
|
||||
set backend <name> resume Resume health checking; backend re-enters unknown state
|
||||
and is probed immediately.
|
||||
sync vpp lbstate [<name>] Reconcile the VPP load-balancer dataplane from the
|
||||
running config. Without a name: runs a full sync —
|
||||
creates missing VIPs, removes stale VIPs, and adjusts
|
||||
application-server membership and weights across all
|
||||
frontends. With a name: only the named frontend's VIP
|
||||
is reconciled, and no VIPs are removed. A full sync
|
||||
also runs automatically every
|
||||
maglev.vpp.lb.sync-interval (default 30s) to catch
|
||||
drift, and once on startup.
|
||||
|
||||
set backend <name> pause Stop health checking for a backend. Cancels the probe
|
||||
goroutine so no further traffic is sent, and freezes
|
||||
the state at whatever it was when paused.
|
||||
set backend <name> resume Resume health checking. A fresh probe goroutine is
|
||||
started and the backend re-enters unknown state.
|
||||
set backend <name> disable Stop probing entirely and remove the backend from rotation.
|
||||
The backend remains visible (state: disabled) and can be
|
||||
re-enabled without reloading configuration.
|
||||
|
||||
Reference in New Issue
Block a user