701674399a8dea40f21e766504dd69810d39f6d0
4 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Pim van Pelt
|
701674399a | Release v1.0.0 under Apache-2.0 license | ||
|
Pim van Pelt
|
6b2b04b2d1 |
Frontend flush-on-down policy; v0.9.3
Adds a per-frontend flush-on-down flag (default true) that causes maglevd to set is_flush=true on lb_as_set_weight when a backend transitions to StateDown, tearing down existing flows pinned to the dead AS instead of just draining them. rise/fall debouncing in the health checker already absorbs single-probe flaps, so a fall-counted down is almost always a real outage — and during a real outage the client-visible "connection refused" oscillation window (where VPP keeps steering existing flows at a dead AS until retry) is a reliability regression worth closing by default. Operators who want the pre-flag drain-only behaviour can set flush-on-down: false per frontend. BackendEffectiveWeight's truth table grows one axis: StateDown now returns (0, flushOnDown); StateDisabled still unconditionally flushes; StateUnknown / StatePaused still never flush. The unit test pins all four combinations. The flag surfaces in the gRPC FrontendInfo message and in `maglevc show frontend <name>` right next to src-ip-sticky. |
||
|
Pim van Pelt
|
4347bb9b05 |
Bug fixes, config validation, SPA tightening, set-weight UI
This session covers three distinct arcs: correctness bug fixes in the
VPP sync path and frontend reducers, new config validation, and a
large polish pass on the web frontend (tighter layout, backend kebab
dialogs, live grouped-table, live config-reload re-sync).
- encap for a VIP is now derived from the backend address family,
not the VIP's. A v6 VIP with v4 backends is programmed as IP6_GRE4
(not the buggy IP6_GRE6), matching the VPP LB plugin's
requirement that encap reflects the tunnel inner family. desiredVIP
gained an Encap field populated in desiredFromFrontend.
- ActivePoolIndex now requires at least one backend in a pool to be
BOTH in StateUp AND pb.Weight>0 before the pool counts as active.
Previously a primary pool with every backend manually zeroed would
still win over a fallback with weight=100, so fallback traffic
never materialized. New TestActivePoolIndexWeightedFailover table
pins the rule in five subcases.
- SyncLBStateVIP gained a flushAddress parameter threaded through
reconcileVIP; it forces flush=true on the setASWeight call for a
specific backend regardless of the usual 0→N heuristic. Wires up
the explicit [flush] knob the CLI exposes.
- convertFrontend already enforced that backends within one frontend
share a family. New cross-frontend pass validateVIPFamilyConsistency
rejects configs where two frontends share a VIP address but carry
backends in different families — VPP's LB plugin requires every
VIP on a prefix to have the same encap type, so such a config
would fail at lb_add_del_vip_v2 time with VNET_API_ERROR_INVALID
_ARGUMENT (-73). Catching it at config load turns a silent
runtime failure into a clear startup error.
- Two new TestValidationErrors cases pin the behavior: mismatched
families reject, same-family frontends on one VIP address allowed.
- Proto adds `bool flush = 5` to SetWeightRequest. The RPC now
drives a VIP sync immediately after mutating config (fixing the
latent "weight change only takes effect at the next 30s periodic
reconcile" gap), passing flushAddress = backend IP when req.Flush
is true.
- maglevc grows an optional [flush] token: `set frontend F pool P
backend B weight N [flush]`. Implementation uses two Run closures
(runSetFrontendPoolBackendWeight and -Flush) because the tree
walker only puts slot tokens in args — literal keywords like
`flush` advance the node but don't appear in the arg list.
- docs/user-guide.md updated with the [flush] optional and a
three-paragraph explainer of the graceful-drain vs. flush
semantics at the VPP level.
- checker.ListFrontends now sorts alphabetically to match the
existing sort in ListBackends / ListHealthChecks — RPC responses
no longer shuffle VIPs per call. cmd/frontend/client.go also
sorts defensively in refreshAll so an old maglevd build renders
alphabetically too.
- backendFromProto was returning out.Transitions[n-1] as the
LastTransition, but maglevd stores (and the proto carries)
transitions newest-first, so [n-1] was actually the oldest.
Reverse on read, which normalizes the client's Transitions slice
to oldest-first and makes [n-1] genuinely the newest. LastTransition
now points at the actual latest transition record.
- applyBackendTransition (Go and TS) derives Enabled = state!="disabled"
so the two fields stay in lockstep — closed a drift window where
a recently re-enabled backend still rendered with a stuck
[disabled] tag. The tag was later removed entirely since state
and enabled carry the same information.
- Layout tightened substantially: "FRONTENDS" panel header removed,
zippy-summary and zippy-body paddings cut, backend-table row
padding dropped to 2px, per-pool <h3> removed. Pools now live in
a single consolidated table per frontend with a dedicated "pool"
column that shows the pool name only on the first row of each
group — classic grouped-table layout, maximally dense.
- Description moved inline into the Zippy summary as muted italic
text, freeing a vertical line per frontend card.
- formatVIPAddress() helper renders IPv6 VIPs as [addr]:port and
IPv4 as addr:port, matching RFC 3986 authority syntax.
- Pools with effective_weight=0 on every backend (standby
fallbacks, fully-drained primaries) render at opacity 0.35 on
their non-actions cells; the kebab column stays at full contrast
because its menu is still fully functional on standby backends.
- Config-reload propagation: a maglevd config-reload-done log
event triggers triggerConfigResync() on the frontend side —
refreshAll() runs off the event-dispatch goroutine, then a
BrowserEvent{Type:"resync"} is published through the broker.
writeEvent emits type="resync" as a named SSE frame so the
SPA's existing addEventListener("resync") handler picks it up
and calls fetchAllState → replaceAll.
- recomputeEffectiveWeights in stores/state.ts mirrors the
server-side health.EffectiveWeights logic so the SPA keeps
pool.effective_weight correct the moment a backend transitions,
without waiting for the 30s refresh. Fixed a nasty bug where
applyBackendEffectiveWeight wrote VIP-scoped vpp-lb-sync-as-*
event weights into every frontend sharing the backend,
corrupting frontends with different per-pool configured weights.
The old log-event reducer was removed; applyConfiguredWeight is
the narrower replacement used by the kebab set-weight flow.
- applyBackendTransition calls recomputeEffectiveWeights after
state updates so pool-failover transitions (primary ⇌ fallback)
reflect instantly in the UI.
- Confirmation dialogs via a new Modal primitive
(Portal-mounted to document.body, escape/click-outside close,
click-outside debounced on mousedown so mid-row-text-selection
drags don't dismiss).
- pause/resume/enable/disable each show a Modal with a consequence
paragraph explaining what hits live traffic ("will keep existing
flows", "will flush VPP's flow table", etc.). The disable commit
button is styled btn-danger red.
- set-weight action shows a Modal with a range slider (0-100,
seeded from the current configured weight, accent-colored live
numeric readout via <output>) plus a flush checkbox and a live-
swapping note/warn paragraph describing what will happen. On
commit, the SPA also updates its local store via
applyConfiguredWeight so the operator sees the new weight
immediately without waiting for the next refresh.
- ProbeHeartbeat is now state-aware: ▶ (play) at rest for up/
down/unknown backends, ⏸ (pause) for paused, ⏹ (stop) for
disabled/removed, ❤️ (heart) during an in-flight probe.
- Drop the probe-done event listener — fast probes (<10ms)
could fire probe-done in the same render tick as probe-start
and the heart would never visibly paint. Each probe-start now
runs a fixed 400ms scale-pop animation on a timer; subsequent
probe-start events reset the timer, so fast cadences produce a
continuous heart pulse.
- Fixed wrapper box (16x14 px, overflow hidden) so the row
doesn't jiggle when the glyph swaps between the narrow ▶/⏸/⏹
text glyphs and the wider ❤️ emoji.
- Brand wordmark changed from "maglev" to "vpp-maglev" and wrapped
in an <a> linking to https://git.ipng.ch/ipng/vpp-maglev. Logo
link changed to https://ipng.ch/. Both open in a new tab with
rel="noopener".
- .gitignore fix: `frontend`, `maglevc`, `maglevd` were matching
ANY file or directory with those names anywhere in the tree,
silently ignoring cmd/frontend and friends. Anchored with
leading slashes so only repo-root build artifacts match.
|
||
|
Pim van Pelt
|
fb62532fd5 |
VPP LB counters, src-ip-sticky, and frontend state aggregation
New feature: per-VIP / per-backend runtime counters
* New GetVPPLBCounters RPC serving an in-process snapshot refreshed
by a 5s scrape loop (internal/vpp/lbstats.go). Each cycle pulls
the LB plugin's four SimpleCounters (next, first, untracked,
no-server) plus the FIB /net/route/to CombinedCounter for every
VIP and every backend host prefix via a single DumpStats call.
* FIB stats-index discovery via ip_route_lookup (internal/vpp/
fibstats.go); per-worker reduction happens in the collector.
* Prometheus collector exports vip_packets_total (kind label),
vip_route_{packets,bytes}_total, and backend_route_{packets,
bytes}_total. Metrics source interface extended with VIPStats /
BackendRouteStats; vpp.Client publishes snapshots via
atomic.Pointer and clears them on disconnect.
* New 'show vpp lb counters' CLI command. The 'show vpp lbstate'
and 'sync vpp lbstate' commands are restructured under 'show
vpp lb {state,counters}' / 'sync vpp lb state' to make room
for the new verb.
New feature: src-ip-sticky frontends
* New frontend YAML key 'src-ip-sticky' (bool). Plumbed through
config.Frontend, desiredVIP, and the lb_add_del_vip_v2 call.
* Reflected in gRPC FrontendInfo.src_ip_sticky and VPPLBVIP.
src_ip_sticky, and shown in 'show vpp lb state' output.
* Scraped back from VPP by parsing 'show lb vips verbose' through
cli_inband — lb_vip_details does not expose the flag. The same
scrape also recovers the LB pool index for each VIP, which the
stats-segment counters are keyed on. This is a documented
temporary workaround until VPP ships an lb_vip_v2_dump.
* src_ip_sticky cannot be mutated on a live VIP, so a flipped flag
triggers a tear-down-and-recreate in reconcileVIP (ASes deleted
with flush, VIP deleted, then re-added). Flip is logged.
New feature: frontend state aggregation and events
* New health.FrontendState (unknown/up/down) and FrontendTransition
types. A frontend is 'up' iff at least one backend has a nonzero
effective weight, 'unknown' iff no backend has real state yet,
and 'down' otherwise.
* Checker tracks per-frontend aggregate state, recomputing after
each backend transition and emitting a frontend-transition Event
on change. Reload drops entries for removed frontends.
* checker.Event gains an optional FrontendTransition pointer;
backend- vs. frontend-transition events are demultiplexed on
that field.
* WatchEvents now sends an initial snapshot of frontend state on
connect (mirroring the existing backend snapshot), subscribes
once to the checker stream, and fans out to backend/frontend
handlers based on the client's filter flags. The proto
FrontendEvent message grows name + transition fields.
* New Checker.FrontendState accessor.
Refactor: pure health helpers
* Moved the priority-failover selector and the (pool idx, active
pool, state, cfg weight) → (vpp weight, flush) mapping out of
internal/vpp/lbsync.go into a new internal/health/weights.go so
the checker can reuse them for frontend-state computation
without importing internal/vpp.
* New functions: health.ActivePoolIndex, BackendEffectiveWeight,
EffectiveWeights, ComputeFrontendState. lbsync.go now calls
these directly; vpp.EffectiveWeights is a thin wrapper over
health.EffectiveWeights retained for the gRPC observability
path. Fully unit-tested in internal/health/weights_test.go.
maglevc polish
* --color default is now mode-aware: on in the interactive shell,
off in one-shot mode so piped output is script-safe. Explicit
--color=true/false still overrides.
* New stripHostMask helper drops /32 and /128 from VIP display;
non-host prefixes pass through unchanged.
* Counter table column order fixed (first before next) and
packets/bytes columns renamed to fib-packets/fib-bytes to
clarify they come from the FIB, not the LB plugin.
Docs
* config-guide: document src-ip-sticky, including the VIP
recreate-on-change caveat.
* user-guide, maglevc.1, maglevd.8: updated command tree, new
counters command, color defaults, and the src-ip-sticky field.
|