# Health Checking `maglevd` probes each backend independently of how many frontends reference it. Every backend runs exactly one probe goroutine. State changes are broadcast as gRPC events to all connected `WatchEvents` subscribers. --- ## States | State | Meaning | |---|---| | `unknown` | Initial state; also entered after a resume or enable. | | `up` | Backend is healthy and eligible to receive traffic. | | `down` | Backend has failed enough consecutive probes to be considered offline. | | `paused` | Health checking stopped by an operator. No probes are sent. | | `disabled` | Backend disabled by an operator. No probes are sent. | | `removed` | Backend removed from configuration by a reload. No probes are sent. | --- ## Rise / fall counter The state machine is driven by HAProxy's single-integer health counter. ``` counter ∈ [0, rise + fall − 1] (called Max below) backend is UP when counter ≥ rise backend is DOWN when counter < rise ``` On each probe: - **pass** — counter increments, ceiling at Max. - **fail** — counter decrements, floor at 0. This gives **hysteresis**: a backend that is barely up (counter = rise) needs `fall` consecutive failures before it transitions to down. A backend that is fully down (counter = 0) needs `rise` consecutive passes to come back up. A backend that oscillates between passing and failing stays in the degraded range without bouncing between up and down. ### Expedited unknown resolution When a backend enters `unknown` state (new, restarted, resumed, or re-enabled) its counter is pre-loaded to `rise − 1`. This means a single probe result is enough to resolve the state: - **1 pass** → `up` - **1 fail** → `down` (also via the special unknown shortcut below) In addition, any failure while state is `unknown` transitions immediately to `down`, regardless of the counter value. ### Example: rise=2, fall=3 (Max=4) ``` counter: 0 1 2 3 4 state: DOWN DOWN UP UP UP ^ rise boundary ``` A backend starting from unknown has counter=1 (rise−1). One pass → counter=2 → up. One fail while unknown → down immediately. A backend that just became up sits at counter=2. It needs 3 failures to go down (2→1→0, crossing the rise boundary at 2→1). A backend that has been fully healthy for a while sits at counter=4. It needs 3 failures to go down (4→3→2→1, crossing the rise boundary at 2→1). --- ## Probe intervals The interval used between probes depends on the backend's counter state: | Condition | Interval used | |---|---| | State is `unknown` | `fast-interval` (falls back to `interval`) | | Counter = Max (fully healthy) | `interval` | | Counter = 0 (fully down) | `down-interval` (falls back to `interval`) | | Counter between 0 and Max (degraded) | `fast-interval` (falls back to `interval`) | Using `fast-interval` in degraded and unknown states means a flapping or recovering backend is re-evaluated quickly without waiting a full `interval`. Using `down-interval` for fully down backends reduces probe traffic to servers that are known to be offline. --- ## Transition events Every state change is logged as `backend-transition` and emitted as a gRPC `BackendEvent` to all active `WatchEvents` streams. ### Backend added (config load or reload) ``` unknown → unknown (code: start) ``` The counter is pre-loaded to `rise − 1`. The first probe fires after `fast-interval` (or `interval` if not configured). One pass produces `unknown → up`; one fail produces `unknown → down`. If multiple backends start together they are staggered across the first `interval` to avoid probe bursts. ### Probe pass - Counter increments. - If counter reaches `rise` from below: `down → up` (or `unknown → up`). - If already up: no transition. Next probe at `fast-interval` if degraded, `interval` if fully healthy. ### Probe fail - Counter decrements. - If counter drops below `rise` from above: `up → down`. - If state is `unknown`: transition immediately to `down` regardless of counter. - Next probe at `down-interval` if fully down, `fast-interval` if degraded. ### Pause ``` → paused (operator action) ``` The counter is reset to 0. The probe goroutine is cancelled — no further probes are sent and no traffic reaches the backend while it is paused. The backend stays `paused` until explicitly resumed. ### Resume ``` paused → unknown (operator action) ``` The counter is reset to `rise − 1`. A fresh probe goroutine is started, which fires its first probe after `fast-interval` (or `interval` if not configured). One pass produces `unknown → up`; one fail produces `unknown → down`. ### Disable ``` → disabled (operator action) ``` The probe goroutine is cancelled and the backend is marked `enabled: false`. No further probes are sent. The backend remains visible via the gRPC API (state `disabled`) and can be re-enabled without a config reload. ### Enable ``` disabled → unknown (operator action, via fresh goroutine) ``` A new probe goroutine is started and the backend re-enters `unknown` with the counter pre-loaded to `rise − 1`. The `enabled` flag is set back to `true`. The first probe fires after `fast-interval` and resolves state as described under *Backend added*. ### Backend removed (config reload) ``` → removed (code: removed) ``` The probe goroutine stops. No further state changes occur. The removed event is emitted using the frontend map from before the reload so that consumers can correlate it to the correct frontend. ### Backend healthcheck config changed (config reload) The old probe goroutine is stopped (` → removed`) and a new one started (`unknown → unknown`, code: `start`). The new goroutine resolves state on the first probe as described under *Backend added* above. ### Backend metadata changed without healthcheck change (config reload) Weight, enabled flag, and similar fields are updated in place. The probe goroutine is not restarted and no transition event is emitted. --- ## Log lines All state changes produce a structured log line at `INFO` level: ```json {"level":"INFO","msg":"backend-transition","backend":"nginx0-ams","from":"up","to":"paused"} {"level":"INFO","msg":"backend-transition","backend":"nginx0-ams","from":"paused","to":"unknown"} {"level":"INFO","msg":"backend-transition","backend":"nginx0-ams","from":"unknown","to":"up","code":"L7OK","detail":""} ``` Probe-driven transitions also carry `code` and `detail` fields from the probe result (e.g. `L4CON`, `L7STS`, `connection refused`). Operator-driven transitions (pause, resume, disable, enable) carry empty code and detail.