#pragma once

#include "mgos.h"
#include "mgos_barometer_internal.h"

// DevID: 0x56/0x57 are samples of BMP280; 0x58 is mass production BMP280; 0x60 is BME280
#define BME280_REG_DEVID                   (0xD0)  /* Chip ID Register */
#define BME280_REG_RESET                       (0xE0)  /* Softreset Register */
#define BME280_REG_STATUS                      (0xF3)  /* Status Register */
#define BME280_REG_CTRL_MEAS                 (0xF4)  /* Ctrl Measure Register */
#define BME280_REG_CONFIG                    (0xF5)  /* Configuration Register */
#define BME280_REG_PRESSURE_MSB              (0xF7)  /* Pressure MSB Register */
#define BME280_REG_PRESSURE_LSB              (0xF8)  /* Pressure LSB Register */
#define BME280_REG_PRESSURE_XLSB             (0xF9)  /* Pressure XLSB Register */
#define BME280_REG_TEMPERATURE_MSB           (0xFA)  /* Temperature MSB Reg */
#define BME280_REG_TEMPERATURE_LSB           (0xFB)  /* Temperature LSB Reg */
#define BME280_REG_TEMPERATURE_XLSB          (0xFC)  /* Temperature XLSB Reg */
#define BME280_REG_HUMIDITY_MSB           (0xFD)  /* Humidity MSB Reg (BME280 only)*/
#define BME280_REG_HUMIDITY_LSB           (0xFE)  /* Humidity LSB Reg (BME280 only)*/
#define BME280_MODE_SLEEP                   (0x00)
#define BME280_MODE_FORCED                   (0x01)
#define BME280_MODE_NORMAL                   (0x03)

#define BME280_REG_TEMPERATURE_CALIB_DIG_T1_LSB             (0x88)

#define BME280_OVERSAMP_SKIPPED          (0x00)
#define BME280_OVERSAMP_1X               (0x01)
#define BME280_OVERSAMP_2X               (0x02)
#define BME280_OVERSAMP_4X               (0x03)
#define BME280_OVERSAMP_8X               (0x04)
#define BME280_OVERSAMP_16X              (0x05)

#define BME280_STANDBY_500us             (0x00)
#define BME280_STANDBY_62ms              (0x01)
#define BME280_STANDBY_125ms              (0x02)
#define BME280_STANDBY_250ms              (0x03)
#define BME280_STANDBY_500ms              (0x04)
#define BME280_STANDBY_1000ms             (0x05)
// Note: Datasheet defines 110 == 10ms, 111 == 20ms, but BME280 and BMP280
// implement this differently.
#define BME280_FILTER_OFF             (0x00)
#define BME280_FILTER_2X            (0x01)
#define BME280_FILTER_4X             (0x02)
#define BME280_FILTER_8X             (0x03)
#define BME280_FILTER_16X             (0x04)


struct mgos_barometer_bme280_calib_data {
  // Calibration data:
  uint16_t dig_T1;
  int16_t dig_T2;
  int16_t dig_T3;
  uint16_t dig_P1;
  int16_t dig_P2;
  int16_t dig_P3;
  int16_t dig_P4;
  int16_t dig_P5;
  int16_t dig_P6;
  int16_t dig_P7;
  int16_t dig_P8;
  int16_t dig_P9;

  // Additional calibration data for BME280
  uint8_t dig_H1;
  int16_t dig_H2;
  uint8_t dig_H3;
  int16_t dig_H4; // Note: this is 0xE4 / 0xE5[3:0]
  int16_t dig_H5; // Note: this is 0xE5[7:4] / 0xE6
  int8_t dig_H6;
};

struct mgos_barometer_bme280_data {
  struct mgos_barometer_bme280_calib_data calib;

  float humidity;
};

bool mgos_barometer_bme280_detect(struct mgos_barometer *dev);
bool mgos_barometer_bme280_create(struct mgos_barometer *dev);
bool mgos_barometer_bme280_destroy(struct mgos_barometer *dev);
bool mgos_barometer_bme280_read(struct mgos_barometer *dev);