131 lines
5.1 KiB
Markdown
131 lines
5.1 KiB
Markdown
# A VPP Configuration Utility
|
|
|
|
## Configuration Guide
|
|
|
|
`vppcfg` consumes YAML files of a specific format. Their validity is asserted by two main
|
|
types of validation:
|
|
|
|
1. syntax checks are performed by [Yamale](https://github.com/23andMe/Yamale/) and this
|
|
ensures that all fields in the YAML file are correctly formed, that field-names are
|
|
correctly spelled, that no extra fields are given, and their values are of the correct
|
|
type.
|
|
1. semantic validations are performed to ensure that configurations are safely applyable
|
|
to a running VPP. *Note*: Some semantic checks are stricter than VPP, because applying
|
|
them may leave the dataplane in a non-recoverable state.
|
|
|
|
For the curious, the Yamale syntax validation lives in [this schema](../schema.yaml).
|
|
|
|
### Basic structure
|
|
|
|
The YAML configuration file has the following structure, consisting of several _maps_ of
|
|
a given object _type_, which specify _names_ of those objects:
|
|
|
|
```
|
|
loopbacks:
|
|
loop0:
|
|
[ Loopback Configuration ]
|
|
|
|
bondethernets:
|
|
BondEthernet0:
|
|
[ BondEthernet (bond) Configuration ]
|
|
|
|
vxlan_tunnels:
|
|
vxlan_tunnel0:
|
|
[ VXLAN (tunnel) Configuration ]
|
|
|
|
bridgedomains:
|
|
bd1:
|
|
[ BridgeDomain Configuration ]
|
|
|
|
interfaces:
|
|
GigabitEthernet3/0/0:
|
|
[ Interface Configuration ]
|
|
BondEthernet0:
|
|
[ BondEthernet (interface) Configuration ]
|
|
vxlan_tunnel0:
|
|
[ VXLAN (interface) Configuration ]
|
|
```
|
|
|
|
Object _names_ are strictly enforced, they must be unique in their scope, and they are case sensitive.
|
|
For example, any loopback MUST be named `loopN`, and any bondethernet MUST be named `BondEthernetN`
|
|
(note here the camel case). A distinction is made between the object and the resulting interface:
|
|
A BondEthernet occurs twice in the configuration. The first time, in the `bondethernets` section, the
|
|
bond configuration is specified. That bond configuration yields an interface in VPP named BondEthernetN,
|
|
which occurs in the `interfaces` section where it can then be manipulated like any other interface (eg.
|
|
have IP addresses, Linux Control Plane names, sub-interfaces and so on). The same is true for VXLAN
|
|
tunnels, the only currently supported tunnel type.
|
|
|
|
### Loopbacks
|
|
|
|
Loopbacks are required to be named `loopN` where N in [0,4096). The configuration allows the
|
|
following fields:
|
|
|
|
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
|
|
and double quote ". This string is currently not used anywhere, and serves for enduser
|
|
documentation purposes.
|
|
* ***lcp***: A Linux Control Plane interface pair _LIP_. If specified, the loopback will be
|
|
presented in Linux under this name. Its name may be at most 15 characters long, and match
|
|
the regular expression `[a-z]+[a-z0-9-]*`.
|
|
* ***mtu***: An integer value between [128,9216], noting the (packet) MTU of the loopback. It
|
|
will default to 1500 if not specified.
|
|
* ***addresses***: A list of between one and six IPv4 or IPv6 addresses including prefixlen
|
|
in CIDR format. VPP requires IP addresses to be unique in the entire dataplane, with one
|
|
notable exception: Multiple IP addresses in the same prefix/len can be added on one and the
|
|
same interface.
|
|
|
|
Although VPP would allow it, `vppcfg` does not allow for loopbacks to have sub-interfaces.
|
|
|
|
Examples:
|
|
```
|
|
loopbacks:
|
|
loop0:
|
|
description: "loopback with default 1500 byte MTU"
|
|
lcp: lo0
|
|
addresses: [ 10.0.0.1/32, 2001:db8::1/128 ]
|
|
loop1:
|
|
lcp: bvi1
|
|
mtu: 9000
|
|
addresses: [ 10.0.1.1/24, 10.0.1.2/24, 2001:db8:1::1/64 ]
|
|
```
|
|
|
|
### Bridge Domains
|
|
|
|
BridgeDomains are required to be named `bdN` where N in [1, 16777216). Note that bridgedomain
|
|
`bd0` is reserved and cannot be used. The configuration allows the following fields:
|
|
|
|
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
|
|
and double quote ". This string is currently not used anywhere, and serves for enduser
|
|
documentation purposes.
|
|
* ***mtu***: An integer value between [128,9216], noting the (packet) MTU of the bridgedomain.
|
|
It will default to 1500 if not specified. All member interfaces, including the `BVI`, are
|
|
required to have the same MTU as their bridge.
|
|
* ***bvi***: An optional _bridge virtual interface_ (sometimes also referred to as an _IRB_)
|
|
which refers to an existing loopback interface by name (ie `loop0`).
|
|
* ***interfaces***: A list of zero or more interfaces or sub-interfaces that are bridge
|
|
members. If the bridge has a `BVI`, it MUST NOT appear in this list. Bridges are allowed to
|
|
exist with no member interfaces.
|
|
|
|
Any member sub-interfaces that are added, will automatically be configured to tag-rewrite the
|
|
number of tags they have, so a simple dot1q sub-interface will be configured as `pop 1`, while
|
|
a QinQ or QinAD sub-interface will be configured as `pop 2`. Conversely, when interfaces are
|
|
removed from the bridge, their tag-rewriting will be disabled.
|
|
|
|
Examples:
|
|
```
|
|
bridgedomains:
|
|
bd10:
|
|
mtu: 2000
|
|
bvi: loop1
|
|
interfaces: [ BondEthernet0.500, HundredGigabitEthernet12/0/1, vxlan_tunnel1 ]
|
|
bd11:
|
|
description: "No member interfaces, default 1500 byte MTU"
|
|
```
|
|
|
|
|
|
|
|
### BondEthernets
|
|
|
|
### Interfaces
|
|
|
|
### VXLAN Tunnels
|