ipng/vppcfg
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
8854208b098eee59843e65c16679d2c75acfd721
vppcfg/docs/config-guide.md
Pim van Pelt 2360d28d0a Add the ability to set any mode/lb on bonds 
This requires a schema change, adding 'mode' and 'load-balance' fields,
a semantic invariant that 'load-balance' can only be set in the case of
LACP and XOR bonds, a mapper from the mode/lb strings, ie.
"round-robin" to their VPP numeric counterparts, a bunch of unit tests.

Then in the reconciler, changing bonds (__bond_has_diff()) will
invalidate any LCP or sub-interfaces built on them, so those will have
to be pruned. create_bondethernet() will now create (or re-create)
the bond with the correct flags.

Unit-tests, YAML tests and the integration test all pass.

Updated config-guide.
2022-04-05 15:05:03 +00:00

297 lines
13 KiB
Markdown
Raw Blame History

# A VPP Configuration Utility
## Configuration Guide
`vppcfg` consumes YAML files of a specific format. Their validity is asserted by two main
types of validation:
1. syntax checks are performed by [Yamale](https://github.com/23andMe/Yamale/) and this
ensures that all fields in the YAML file are correctly formed, that field-names are
correctly spelled, that no extra fields are given, and their values are of the correct
type.
1. semantic validations are performed to ensure that configurations are safely applyable
to a running VPP. *Note*: Some semantic checks are stricter than VPP, because applying
them may leave the dataplane in a non-recoverable state.
For the curious, the Yamale syntax validation lives in [this schema](../schema.yaml).
If you want to get started quickly and don't mind cargo-culting, take a look at [this example](../example.yaml).
### Basic structure
The YAML configuration file has the following structure, consisting of several _maps_ of
a given object _type_, which specify _names_ of those objects:
```
loopbacks:
loop0:
[ Loopback Configuration ]
bondethernets:
BondEthernet0:
[ BondEthernet (bond) Configuration ]
vxlan_tunnels:
vxlan_tunnel0:
[ VXLAN (tunnel) Configuration ]
bridgedomains:
bd1:
[ BridgeDomain Configuration ]
interfaces:
GigabitEthernet3/0/0:
[ Interface Configuration ]
BondEthernet0:
[ BondEthernet (interface) Configuration ]
vxlan_tunnel0:
[ VXLAN (interface) Configuration ]
```
Object _names_ are strictly enforced, they must be unique in their scope, and they are case sensitive.
For example, any loopback MUST be named `loopN`, and any bondethernet MUST be named `BondEthernetN`
(note here the camel case). A distinction is made between the object and the resulting interface:
A BondEthernet occurs twice in the configuration. The first time, in the `bondethernets` section, the
bond configuration is specified. That bond configuration yields an interface in VPP named BondEthernetN,
which occurs in the `interfaces` section where it can then be manipulated like any other interface (eg.
have IP addresses, Linux Control Plane names, sub-interfaces and so on). The same is true for VXLAN
tunnels, the only currently supported tunnel type.
### Loopbacks
Loopbacks are required to be named `loopN` where N in [0,4096). The configuration allows the
following fields:
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
and double quote ". This string is currently not used anywhere, and serves for enduser
documentation purposes.
* ***lcp***: A Linux Control Plane interface pair _LIP_. If specified, the loopback will be
presented in Linux under this name. Its name may be at most 15 characters long, and match
the regular expression `[a-z]+[a-z0-9-]*`.
* ***mtu***: An integer value between [128,9216], noting the (packet) MTU of the loopback. It
will default to 1500 if not specified.
* ***addresses***: A list of between one and six IPv4 or IPv6 addresses including prefixlen
in CIDR format. VPP requires IP addresses to be unique in the entire dataplane, with one
notable exception: Multiple IP addresses in the same prefix/len can be added on one and the
same interface.
Although VPP would allow it, `vppcfg` does not allow for loopbacks to have sub-interfaces.
Examples:
```
loopbacks:
loop0:
description: "loopback with default 1500 byte MTU"
lcp: lo0
addresses: [ 10.0.0.1/32, 2001:db8::1/128 ]
loop1:
lcp: bvi1
mtu: 9000
addresses: [ 10.0.1.1/24, 10.0.1.2/24, 2001:db8:1::1/64 ]
```
### Bridge Domains
BridgeDomains are required to be named `bdN` where N in [1, 16777216). Note that bridgedomain
`bd0` is reserved and cannot be used. The configuration allows the following fields:
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
and double quote ". This string is currently not used anywhere, and serves for enduser
documentation purposes.
* ***mtu***: An integer value between [128,9216], noting the (packet) MTU of the bridgedomain.
It will default to 1500 if not specified. All member interfaces, including the `BVI`, are
required to have the same MTU as their bridge.
* ***bvi***: An optional _bridge virtual interface_ (sometimes also referred to as an _IRB_)
which refers to an existing loopback interface by name (ie `loop0`).
* ***interfaces***: A list of zero or more interfaces or sub-interfaces that are bridge
members. If the bridge has a `BVI`, it MUST NOT appear in this list. Bridges are allowed to
exist with no member interfaces.
* ***settings***: A map of bridge-domain settings to further manipulate its behavior:
* ***learn***: A boolean that turns learning on/off. Default True.
* ***unicast-flood***: A boolean that turns unicast flooding on/off. Default True.
* ***unknown-unicast-flood***: A boolean that turns unknown unicast flooding on/off.
Default True.
* ***unicast-forward***: A boolean that turns unicast forwarding on/off. Default True.
* ***arp-termination***: A boolean that turns termination and response of ARP Requests
on/off. Default False.
* ***arp-unicast-forward***: A boolean that turns L2 arp-unicast forwarding on/off.
Default False.
* ***mac-age-minutes***: An integer between [0,256) that drives the ARP timeout on the
bridge in minutes, where 0 means do not age out, which is the default.
Any member sub-interfaces that are added, will automatically be configured to tag-rewrite the
number of tags they have, so a simple dot1q sub-interface will be configured as `pop 1`, while
a QinQ or QinAD sub-interface will be configured as `pop 2`. Conversely, when interfaces are
removed from the bridge, their tag-rewriting will be disabled.
Examples:
```
bridgedomains:
bd10:
mtu: 2000
bvi: loop1
interfaces: [ BondEthernet0.500, HundredGigabitEthernet12/0/1, vxlan_tunnel1 ]
bd11:
description: "No members, default 1500 byte MTU, with (default) settings"
settings:
learn: True
unicast-flood: True
unknown-unicast-flood: True
unicast-forward: True
arp-termination: False
arp-unicast-forward: False
mac-age-minutes: 0
```
*Caveat*: The flooding of unknown-unicast can be turned on or off, but flooding to a specific interface
(as opposed to all interfaces which is the default), is not supported.
### BondEthernets
BondEthernets are required to be named `BondEthernetN` (note the camelcase) where N in
[0,4294967294). The configuration allows the following fields:
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
and double quote ". This string is currently not used anywhere, and serves for enduser
documentation purposes.
* ***interfaces***: A list of zero or more interfaces that are bond members. The interfaces
must be PHYs, and in their `interface` configuration, members are allowed only to set the
MTU.
* ***mode***: A mode to run the LAG in. Can be one of 'round-robin', 'active-backup', 'xor',
'broadcast' or 'lacp'. The default is LACP.
* ***load-balance***: A loadbalancing strategy to use, if the mode is either XOR or LACP.
Can be one of 'l2', 'l23', or 'l34'. The default is l34, which hashes on the source and
destination IPs and ports.
Note that the configuration object here only specifies the link aggregation and its members.
BondEthernets are expected to occur as well in the `interfaces` section, where their sub-interfaces
and IP addresses and so on are specified.
Examples:
```
bondethernets:
BondEthernet0:
description: "Core: LACP to fsw0.lab.ipng.ch"
interfaces: [ GigabitEthernet1/0/0, GigabitEthernet1/0/1 ]
mode: lacp
load-balance: l2
BondEthernet1:
description: "Core: RR LAG"
interfaces: [ GigabitEthernet3/0/0, GigabitEthernet3/0/1 ]
mode: round-robin
```
### VXLAN Tunnels
VXLAN Tunnels are required to be named `vxlan_tunnelN` (note the underscore), where N in
[0,2G). The configuration allows the following fields:
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
and double quote ". This string is currently not used anywhere, and serves for enduser
documentation purposes.
* ***local***: A required IPv4 or IPv6 address for our (source) side of the tunnel.
* ***remote***: A required IPv4 or IPv6 address for their (destination) side of the tunnel.
* ***vni***: A _Virtual Network Indentifier_, a required integer number between [1,16M).
Local and Remote sides of the tunnel MUST have the same address family.
*Caveat*: VXLAN tunnels are currently only possible as unicast (src/dst), with static source
and destination ports (4789), and with a `decap-next` of L2. Also, VNIs must be globally unique.
In a future release of `vppcfg`, these fields will be configurable, and VNI reuses will be
allowed between different dst endpoints.
Examples:
```
vxlan_tunnels:
vxlan_tunnel0:
description: "Some IPv6 VXLAN tunnel"
local: 2001:db8::1
remote: 2001:db8::2
vni: 100
vxlan_tunnel1:
local: 192.0.2.1
remote: 192.0.2.2
vni: 101
```
### Interfaces
Interfaces and their sub-interfaces are configured very similarly. Interface names MUST either
exist as a PHY in VPP (ie. `HundredGigabitEthernet12/0/0`) or as a specified `BondEthernetN` or
`vxlan_tunnel0` device. The configuration allows the following fields:
* ***description***: A string, no longer than 64 characters, and excluding the single quote '
and double quote ". This string is currently not used anywhere, and serves for enduser
documentation purposes.
* ***lcp***: A Linux Control Plane interface pair _LIP_. If specified, the interface will be
presented in Linux under this name. Its name may be at most 15 characters long, and match
the regular expression `[a-z]+[a-z0-9-]*`. In sub-interfaces, a _LIP_ may only be specified
if its direct parent has an _LIP_ as well. In the case of a QinQ or QinAD sub-interface, there
must exist an intermediary interface with the correct encapsulation, and it too must have a
_LIP_.
* ***mtu***: An integer value between [128,9216], noting the MTU of the interface. The MTU for
a PHY will be set as its Max Frame Size in addition to its packet MTU. Parents must always have
a larger MTU than any of their children (this is done to satisfy Linux Control Plane).
* ***addresses***: A list of between one and six IPv4 or IPv6 addresses including prefixlen
in CIDR format. VPP requires IP addresses to be unique in the entire dataplane, with one
notable exception: Multiple IP addresses in the same prefix/len can be added on one and the
same interface.
* ***l2xc***: A Layer2 Cross Connect interface name. An `l2xc` will be configured, after which
this interface cannot have any L3 configuration (IP addresses or LCP), and neither can the
target interface.
* ***state***: An optional string that configures the link admin state, either `up` or `down`.
If it is not specified, the link is considered admin 'up'.
Further, top-level interfaces, that is to say those that do not have an encapsulation, are permitted
to have any number of sub-interfaces specified by `subid`, an integer between [0,2G), which further
allow the following field:
* ***encapsulation***: An encapsulation for the sub-interface:
* ***dot1q***: An outer Dot1Q tag, an integer between [1,4096).
* ***dot1ad***: An outer Dot1AD tag, an integer between [1,4096).
* ***inner-dot1q***: An inner Dot1Q tag, an integer between [1,4096).
* ***exact-match***: A boolean, signalling the sub-interface should match on the exact number
of tags specified. This is required for any L3 interface (carrying an IP address or LCP),
but allowed to be False for L2 interfaces (ie. bridge-domain members or L2XC targets).
It's permitted to omit the `encapsulation` fields, in which case an exact-matching Dot1Q
encapsulation with tag value equal to the `subid` will be configured. Obviously, it is forbidden
to specify both `dot1q` and `dot1ad` fields at the same time.
Examples:
```
interfaces:
HundredGigabitEthernet12/0/0:
lcp: "ice0"
mtu: 9000
addresses: [ 192.0.2.1/30, 2001:db8:1::1/64 ]
sub-interfaces:
1234:
mtu: 9000
lcp: "ice0.dot1q"
addresses: [ 192.0.2.5/30, 2001:db8:2::1/64 ]
1235:
mtu: 1500
lcp: "ice0.qinq"
addresses: [ 192.0.2.9/30, 2001:db8:3::1/64 ]
encapsulation:
dot1q: 1234
inner-dot1q: 1000
exact-match: True
BondEthernet0:
mtu: 9000
lcp: "bond0"
sub-interfaces:
100:
mtu: 2500
l2xc: BondEthernet0.200
encapsulation:
dot1q: 100
exact-match: False
200:
mtu: 2500
l2xc: BondEthernet0.100
encapsulation:
dot1q: 200
exact-match: False
```
Reference in New Issue View Git Blame Copy Permalink